Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car radio with a multimedia system on the Skoda Yeti

Model: Skoda Yeti MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

Video tutorial

Below we will see the necessary information to disassemble and replace the factory radio with a new multimedia system in the Skoda Yeti. First, let's get inside the vehicle and start disassembling the factory radio; to do this, we will remove the side plastic cover, then unscrew the fastening screws located next to the radio and disconnect the wiring at the back, as shown in the video.

At this point, we prepare the new multimedia system, modifying the wiring if necessary; let's secure it properly on the dashboard and finally check that it works correctly!


Posted on 12 January 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2012 Skoda Yeti?
How to Reset the Service Light on a 2012 Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) If you own a 2012 Skoda Yeti and want to manually reset the service light independently, simply follow the steps outlined in this guide. First, inser…
How to Replace the Radio in a Škoda Yeti?
How to Replace the Radio in a Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) You can replace the radio in a Škoda Yeti by using a tool to pry off the trim panel surrounding the radio: once this panel is removed, you can locate…
Where is the Trailer Fuse on a Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) If the trailer connected to your Skoda Yeti is not being recognised correctly, first check the condition of the respective fuse, the location of whic…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos