Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Skyteam Skymax
Part: Engine oil

To change the motor oil of a Skyteam Skymax, start by turning on the engine for a few minutes to warm up the oil, making it more fluid and easier to drain. Once the oil is warm, turn off the engine and place the motorcycle on a flat surface, preferably using a stand for stability. Find the oil drain plug, located at the bottom of the engine. Place a container under the plug to collect the used oil and unscrew the plug with a suitable wrench. Let all the oil drain completely, waiting a few minutes to make sure the tank is empty. After the oil has been completely drained, screw the drain plug back in, making sure it is tightly secured to avoid leaks. At this point, you can pour the new motor oil through the fill plug located on the side of the engine. Pour the specified amount of oil slowly to avoid overfilling. Once finished, screw the oil plug back in, start the engine and let it run for a few minutes to allow the new oil to circulate. Check for any leaks and, if everything is okay, turn off the engine and your Skyteam Skymax will be ready for use.

Posted on 13 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Skyteam Skymax?
How do you replace the engine oil of the Skyteam Skymax?
Skymax In order to replace the engine oil of the Skyteam Skymax, you need to loosen the drain plug of the oil pan, located in the central lower part of the …
How to Remove the Fuel Tank from the Skyteam Skymax?
How to Remove the Fuel Tank from the Skyteam Skymax?
Skymax To remove the fuel tank from the Skyteam Skymax, open the under-seat compartment by lifting the seat from the rear. Once lifted, you will have access…
How to Dismantle the Engine of a Skyteam Skymax?
How to Dismantle the Engine of a Skyteam Skymax?
Skymax To dismantle the engine of a Skyteam Skymax, loosen the bolts securing the engine block within its housing, allowing you to disconnect all connectors…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos