Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Forfour
    4. : Fuse box

Smart Forfour - Fuse box

Smart Forfour (2014-2021 / W453, MK 2)
What is the fuse layout of the Smart ForFour EQ?
If the devices of our Smart ForFour EQ have suddenly stopped working, we can first check the status of the corresponding fuses whose diagrams are indicated in …read all…
Posted on 28 April 2024 by ScegliAuto
Smart Forfour (2014-2021 / W453, MK 2)
Where is the fuse box of the Smart ForFour located?
In this video, we can see where the fuse box of the Smart ForFour is located and what is the related diagram, to consult in case we need to check the status of …read all…
Posted on 24 April 2024 by ScegliAuto
Smart Forfour (2004-2006 / MK 1, W454)
Where is the Smart Forfour fuse box located?
If any electrical device on board the car does not work, the first thing to check is the integrity of the relative protection fuse: obviously it must be …read all…
Posted on 20 June 2022 by ScegliAuto
Loudspeaker (1) Spark plugs (1) V-belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (8) Cabin air filter (2) Diesel filter (1) Handle (1) Door panel (3) Front bumper (1) Tires (1) Fuel pump (1) Instrument cluster (1) Fuse box (3) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos