Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Forfour
    4. : Where is the Smart Forfour fuse box located?

Smart Forfour - Video tutorial

Model: Smart Forfour MK 1, W454 - Years 2004-2006
Part: Fuse box
Operation: Where is the Smart Forfour fuse box located?

If any electrical device on board the car does not work, the first thing to check is the integrity of the relative protection fuse: obviously it must be replaced with one of the same capacity and never with a larger one which could cause irreparable breakage of the device itself. ; in the case of the Smart Forfour, the fuse box is located inside the passenger compartment, on the driver's side, in the lower left corner of the dashboard; once the cover has been removed, it is also possible to read the legend which associates each relay and fuse suitably numbered to the component it powers and protects.


Posted on 20 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Forfour 2004-2006 - Where is the Smart ForFour Mk1 fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos