Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Entire Dashboard of the Smart Fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Dashboard

Today, we will discover the main instructions that will allow us to dismantle and replace the entire dashboard of the Smart Fortwo. First, get inside the cabin and start by removing the side plastic covers, then remove the radio and the upper plastic cover; next, unscrew the fastening screws located on the sides of the dashboard until it is completely removed, as shown in the video. At this point, install or replace the dashboard speakers, refitting and securing the dashboard with all screws; then, reassemble all dashboard elements.

Posted on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the internal fuse box of the Smart Fortwo
How to disassemble the internal fuse box of the Smart Fortwo
Smart (2014-2022 / 453) Today we will discover the instructions that will allow us to disassemble and remove the entire internal fuse box of the Smart Fortwo. First, we clim…
How to Remove the Dashboard of the Smart Fortwo
How to Remove the Dashboard of the Smart Fortwo
Smart (1998-2007 / 450) This guide outlines the main steps to remove and replace the dashboard of the Smart Fortwo, following the instructions below. First, get inside the v…
Removing the Engine from a Smart Fortwo
Removing the Engine from a Smart Fortwo
Smart (1998-2007 / 450) In this video tutorial, you will learn how to remove the entire engine block from the chassis of a Smart Fortwo. First, lift the vehicle and remove t…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos