Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper of a Smart Forfour

Model: Smart Forfour MK 1, W454 - Years 2004-2006
Part: Front bumper

Do you want to replace the front bumper of a Smart Forfour? Follow these steps: lift the bonnet and remove it from the body of the vehicle. Then, using a plastic or metal lever, remove the fastening rivets of the bumper located at the top. Once this is done, detach the plastic wheel cover and the rivets of the splash guards located on the wheels (remove the pins around the perimeter of the bumper). Remove the bumper from the body of the vehicle by hand. To proceed with the installation, secure the bumper as shown in the video and tighten all the screws around the splash guard and the perimeter.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the partial odometer of the Smart Forfour?
How do you reset the partial odometer of the Smart Forfour?
Smart Forfour (2014-2021 / MK 2, W453) The need to reset the partial odometer of our car, in this case the Smart Forfour, may arise because we want to check the fuel consumption of a speci…
How do you replace the V-belt of the Smart Forfour?
How do you replace the V-belt of the Smart Forfour?
Smart Forfour (2004-2006 / MK 1, W454) In order to replace the serpentine belt of the Smart Forfour, you need to loosen the screws that secure the front wheel to its housing, and then remo…
Where are the fuses located in the Smart Forfour?
Where are the fuses located in the Smart Forfour?
Smart Forfour (2004-2006 / MK 1, W454) The fuses of the Smart Forfour are contained inside the appropriate fuse boxes that are installed on board the vehicle: in this type of vehicle it wi…

Other guides you may be interested in

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos