Do it yourself
Frequently asked questions about cars and motorcycles

How do you open the hood of a Smart ForTwo 453?

Model: Smart Smart 453 - Years 2014-2022
Part: Body

In this video, we will see how to open the front hood of a Smart ForTwo 453, produced from 2014 onwards. It is a different procedure from traditional cars, because the hood is very small, and even though it opens with the usual release cable from the inside, it will not open by pressing on the center of the hood. Instead, we will need to position ourselves between the bumper and the windshield, insert our fingers in the space in the center, just below the edge of the hood, and press the safety lever located behind the "Smart" logo, lifting the hood upwards. This car does not have hydraulic support, and not all versions have a manual one, so we may need to hold it up with one hand while working. A common issue on older versions is that the cable may have loosened, so we may need to have two people perform the operation: one pulling the lever and the other pressing the hood from the outside. The hood then closes by lowering it to a height of about 20 cm and then pressing firmly until we hear the "click" of closure.

Posted on 15 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Smart (2014-2022 / 453) In this video tutorial, we will see how to remove the rear light on a Smart Fortwo 453 by following these simple steps. First, open the boot lid and …
Smart (2014-2022 / 453) In this video, we will see the main instructions for removing the rear bumper on a Smart Fortwo 453 in simple and quick steps. First, remove the plas…
Smart (2014-2022 / 453) In today's video, you will see the instructions for removing the rear camera on a Smart Fortwo 453. First, obtain a compatible rear camera for your c…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos