Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Bumper of Smart Fortwo 453

Model: Smart Smart 453 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Rear bumper

See other generations:
Video tutorial

In this video, we will see the main instructions for removing the rear bumper on a Smart Fortwo 453 in simple and quick steps. First, remove the plastic clips and screws found on the plastic bumper as shown in the video; then open the boot door and remove the additional screws located at the bottom to release the bumper.

At this point, you can gently detach the bumper from the sides; in this case, a bumper and the exhaust system of the Smart Fortwo Brabus will be fitted subsequently!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to disassemble the rear bumper of the Smart Fortwo
How to disassemble the rear bumper of the Smart Fortwo
Smart (2014-2022 / 453) Below we will see the instructions that will allow us to disassemble and replace the rear bumper of the Smart Fortwo. First, we open the rear hatch o…
How to Remove the Rear Bumper from a Smart ForTwo
How to Remove the Rear Bumper from a Smart ForTwo
Smart (2007-2015 / 451) Before starting, open the rear hatch of the boot on your Smart ForTwo. Start by unscrewing and removing the screws that secure the rear bumper to the…
Removing the Front Bumper and Wing on a Smart Fortwo 453
Removing the Front Bumper and Wing on a Smart Fortwo 453
Smart (2014-2022 / 453) In this video tutorial, follow the instructions to remove the front bumper along with the wing, as a single piece, on a Smart Fortwo 453 in Brabus tr…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos