Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Smart ForTwo

Model: Smart Smart 451 - Years 2007-2015
Part: Rear bumper

Before starting, open the rear hatch of the boot on your Smart ForTwo. Start by unscrewing and removing the screws that secure the rear bumper to the chassis, located around the entire perimeter of the bumper. Next, unclip and remove the fastening clips. By doing this, you will have freed the rear bumper. At this point, unclip and remove the bumper itself, then take it off. Once you have completed this step, you will have finished removing the rear bumper from your Smart ForTwo.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Bumper of the Smart Fortwo
Removing the Rear Bumper of the Smart Fortwo
Smart (1998-2007 / 450) Here are step-by-step instructions to remove and replace the rear bumper of the Smart Fortwo. First, open the rear hatch and start unscrewing the fas…
How to Remove the Rear Bumper on Smart Fortwo 450
How to Remove the Rear Bumper on Smart Fortwo 450
Smart (1998-2007 / 450) .. In this video, see how to remove the rear bumper from a Smart Fortwo 450 by following the instructions below. First, open.. …
How to disassemble and replace the starter motor of the Smart Fortwo
How to disassemble and replace the starter motor of the Smart Fortwo
Smart (1998-2007 / 450) Today we will discover the necessary information on how to disassemble and replace the starter motor of the Smart Fortwo. First, we open the rear hat…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos