Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How do you replace the windshield of the Smart 453?

Smart - Video tutorial

Model: Smart Smart 453 - Years 2014-2022
Part: Windshield
Operation: How do you replace the windshield of the Smart 453?

In order to replace the windshield of the Smart 453, you need to pry an object in the groove that forms between the windshield itself and its housing. In this way it will be possible to completely detach the piece, also removing the gaskets that are found on the inside. Once the old windshield has been detached, you will need to scrape off all the residual glue that is along the pillars, so that you can go and put the new one. In this way it will be possible to insert the new windshield inside its seat, also inserting the gaskets.


Posted on 15 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Smart 2007-2015 - How much does it cost to replace the Smart windshield? Read Answer
    • Smart 2007-2015 - How much does the windshield of the Smart Fortwo cost? Read Answer
    • Smart 2007-2015 - Read Answer
    • Smart 2007-2015 - How much does it cost to replace the windshield of the Smart? Read Answer
    • Smart 2007-2015 - How much does the Smart windshield cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos