Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Smart 453

Model: Smart Smart 453 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Clutch

See other generations:
Video tutorial

To replace the clutch on a Smart 453, first remove the rear bumper by unscrewing all the fastening screws. Next, you will need to remove the exhaust and disassemble the driveshaft to access the gearbox, which is positioned longitudinally.

Once the gearbox is removed, take out the clutch by disassembling its discs. Now take the new clutch and install it. After installation, reassemble all the components.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Smart 453?
How to Replace the Clutch on a Smart 453?
Smart (2014-2022 / 453) To replace the clutch on a Smart 453, lift the vehicle using a ramp to access the underside. Here, drain the oil from the gearbox by unscrewing the d…
How the Dual-Clutch Gearbox Works on the Smart 453
How the Dual-Clutch Gearbox Works on the Smart 453
Smart (2014-2022 / 453) This video illustrates how the dual-clutch gearbox fitted to the Smart 453 operates. It consists of a single pack containing two clutches. Two pressu…
Where to Find the Fuses on the Smart 453
Where to Find the Fuses on the Smart 453
Smart (2014-2022 / 453) If you own a Smart 453 and want to find all the various fuses in the car, simply follow the steps outlined below. First, reach the passenger seat, th…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos