Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Smart car?

Model: Smart Smart 451 - Years 2007-2015
Part: Service warning light

The Service light that is shown on the Smart's instrument panel can be reset by holding down the button located on the left side of the instrument panel. While holding down the button, you will need to insert the ignition key into the appropriate slot on the central tunnel and turn it. This will turn on the instrument panel and you can continue to hold down the button: after a few seconds, you will see that the maintenance light will turn off completely. To verify that the reset has been done correctly, you will need to turn off and turn on the instrument panel again.

Posted on 3 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light of the Smart 450?
Smart (1998-2007 / 450) In order to reset the Service light of the Smart 450, you need to turn on the instrument panel by turning the ignition key inside the ignition switch…
How do you reset the Service light on the Smart Roadster?
How do you reset the Service light on the Smart Roadster?
Smart (2003-2005 / 452, Roadster) It will be possible to completely reset the Service light displayed on the instrument panel of the Smart Roadster by holding down the button located …
How do you reset the Service light on the Smart car?
How do you reset the Service light on the Smart car?
Smart (2014-2022 / 453) In order to reset the Service light on the Smart, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on the…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos