Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Service warning light

It will be possible to completely delete the Service light from the instrument panel of the Smart 451 by keeping the button on the left side of the instrument panel pressed. While keeping it pressed, you will need to insert the ignition key into the corresponding block on the central tunnel and turn it. In this way, the instrument panel will turn on and you can continue to keep it pressed: after a moment, you will see that the maintenance light will disappear completely. To verify that the reset has been done correctly, you will need to turn off and turn on the display again.

Posted on 15 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Smart 451?
How do you reset the Service light on the Smart 451?
Smart (2007-2015 / 451) The operation of resetting the Service light of the Smart 451 is done by turning on the instrument panel by turning the key and then quickly pressing…
To reset the service light on the Smart 451.
To reset the service light on the Smart 451.
Smart (2007-2015 / 451) In order to successfully complete the manual reset of the service light on the instrument panel of your Smart 451, you must follow all the steps desc…
How do you reset the Service light on the Smart 451?
How do you reset the Service light on the Smart 451?
Smart (2007-2015 / 451) To make the Service light disappear from the instrument panel of the Smart 451, you will need to hold down the button located on the left side of the…

How to Remove an EGR Valve from a Land Rover Freelander

This video shows how to remove an EGR valve from a Land Rover Freelander. Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, removing the piece from the engine bay. Start unscrewing the fixing pins of the EGR valve as shown in the video. Once the piece is removed from its seat, unscrew the screws present on it with a screwdriver. Disconnect the power connectors from the valve, and remove it from the engine bay. Once the piece is removed, install the new EGR valve in the engine bay with the associated parts. Finally, reassemble the ventilation pipe in the engine bay after cleaning it of any dirt and deposits.

Watch the video!


by ScegliAuto

More videos