|
Do it yourself
| |||
| ||||
Replacing the Front Headlamp Bulb
Model: Smart Smart
450
- Years 1998-2007
To access the headlamp holder, you need to remove some body parts and the headlamp itself.
First, unscrew the fixing pins of the front wings located near the external mirrors; then, open the doors, remove the pins along the pillars and the radio antenna. Detach and remove the front air grille (be careful not to break the plastic tabs) and unscrew the other fixing screws of the front fairing (these are located near the chassis) which can now be removed by disconnecting the side indicator connectors as well. Next, unscrew the fixing pins of the headlamps and pull them out of their housing to replace the bulbs (release the fixing clip to extract the old bulb): due to the complexity of the operation, it is recommended to replace all bulbs in both headlamps, not just the damaged one. Check the operation and proceed with reassembly.
Updated on 3 February 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Smart
(2007-2015 /
451)
To replace the front headlamp bulb on a Smart 451, open the bonnet to access the rear of the headlamp. Remove the circular cover that protects the co…
Smart
(1998-2007 /
450)
Want to replace the front headlight bulb on your Smart Fortwo? Here’s how to proceed with the replacement. To start: unscrew the retaining screws loc…
Smart
(2007-2015 /
451)
Let's see how to proceed with replacing a headlight bulb on a Smart Fortwo. First, unscrew the securing screws located on the top grille of the headl…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.075
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
