Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the window glass Smart 450

Model: Smart Smart 450 - Years 1998-2007
Part: Side window

In this video we will see how to remove the glass of the passenger side side window of a Smart 450. First unscrew the screw at the top right of the side support with a 25 mm torx: with a plastic lever we will remove the support. Now with a torx 20 we are going to unscrew the screw of the triangular plastic cover where the pin for adjusting the mirror is housed: once removed we unscrew the other 20 torx screw located below. Now we are going to extract the outer door panel by pulling towards you: remove the gaskets, unscrew the screws of the electric motor and remove the glass.

Posted on 29 June 2020 by ScegliAuto

Video tutorial

Related tutorials

How do I remove the outer door panel of the Smart 450?
How do I remove the outer door panel of the Smart 450?
Smart (1998-2007 / 450) The removal of the external door panel of the Smart 450 is carried out by opening the door and removing the side cover in correspondence with the han…
How do you replace the rear glass of the Smart 450?
How do you replace the rear glass of the Smart 450?
Smart (1998-2007 / 450) In order to replace the rear side glass of the Smart 450 you have to remove the plastic cover that is inside the glass, simply by prying under it wit…
Replacement of hydraulic tailgate pistons on Smart 450
Replacement of hydraulic tailgate pistons on Smart 450
Smart (1998-2007 / 450) Removing the hydraulic pistons of the rear glass on Smart 450 is quite simple: just lift the aforementioned glass and unclip the rings of the same wi…

How to Replace the Bulbs on a Nissan Almera Rear Light

Do you want to change the damaged bulb of a rear light on a Nissan Almera? Follow this video carefully to proceed correctly. Open the boot, remove the fabric side covering, and detach the plastic rivets on the covering. Unscrew the retaining bolts of the rear light using a socket spanner. Once the light is free from the bolts, pull the rear light out of the metal housing, then disconnect the power cable. Place the stop light on a comfortable surface and replace all worn bulbs. To refit the rear light, position it in its housing and tighten all screws after reconnecting the lighting connector.

Watch the video!


by ScegliAuto

More videos