Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Outer Door Panel of the Smart 450?

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door trim panel

See other generations:
Video tutorial

To remove the outer door panel of the Smart 450, open the door and detach the side cover near the handle to unscrew the underlying screw. Once this screw is removed, you can pull out the handle and its mechanism by disconnecting its connector.

Next, detach the seal at the top of the door, located at the base of the window. This will allow you to lever under the panel so that it can be removed from the door and replaced with a new spare part.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Remove the Outer Door Panel on a Smart Roadster
How to Remove the Outer Door Panel on a Smart Roadster
Smart (1998-2007 / 450) How to remove the outer door panel on a Smart Roadster? This video explains how to proceed. Before starting the disassembly, disconnect the battery t…
How to Remove the Outer Door Panel of the Smart Fortwo 450
How to Remove the Outer Door Panel of the Smart Fortwo 450
Smart (1998-2007 / 450) In this video, you will learn how to remove the outer door panel of the Smart Fortwo 450 by following the instructions below. First, open the front d…
How to Remove the External Handle of the Smart 450?
How to Remove the External Handle of the Smart 450?
Smart (1998-2007 / 450) To remove the external handle of the Smart 450, open the door and loosen the bolt located inside the door, corresponding to the external handle and n…

    Frequently Asked Questions

    • Smart 2014-2022 - How to remove the door panel in the Smart Fortwo? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos