Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Bulb on a Smart Roadster

Model: Smart Smart 454, Fourfour1 - Years 2004-2006
Part: Tail light bulb

Open the rear boot door and remove the circular seal (in the area of the headlamp) located on the body of the boot. Unscrew the T20 Torx screws securing the affected headlamp to the body and extract it. At this point, you can access any bulb that has blown from the rear. You can similarly access the indicator bulb, the stop bulb, or the regular dipped beam. To do this, simply disconnect the connector, unscrew the bulb, and screw in the new one. Proceed in reverse for complete assembly.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light and Bulbs of the Smart Roadster
How to Replace the Rear Light and Bulbs of the Smart Roadster
Smart (2003-2005 / Roadster, 452) Below are the main steps to remove and replace the rear light and its bulbs of the Smart Roadster. First, move to the rear of the vehicle and start o…
Replacing the Spark Plugs on the Smart Roadster
Replacing the Spark Plugs on the Smart Roadster
Smart (2003-2005 / Roadster, 452) Today, we will see in this video tutorial how to remove and replace the engine spark plugs of the Smart Roadster, following the instructions below. F…
How to Replace the Front Engine Mount in a Smart Roadster?
How to Replace the Front Engine Mount in a Smart Roadster?
Smart (2003-2005 / Roadster, 452) In this tutorial, see how to replace the front engine mount in a Smart Roadster. This simple operation requires attention and good manual skills. Fir…

How to Activate Bluetooth on the BMW 1 Series?

To activate Bluetooth on the BMW 1 Series, turn on the ignition so you can press the MENU button on the central control panel. This will allow you to select the "TEL" option to make the device visible. Then, connect to the radio using your mobile phone, selecting the device called "BMW" followed by a five-digit code. This code must be entered using the radio controls, confirming with OK. After entering and confirming, you will notice that the pairing between the devices has occurred.

Watch the video!


by ScegliAuto

More videos