Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Pedal Switch on Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015

In this video, you will disassemble and replace the brake pedal switch on a Smart Fortwo, both first and second generation, by following these simple steps. First, open the front door and locate the sensor next to the brake pedal rod; then disconnect its electrical connector by pressing the tab, and rotate the switch upwards to remove it, as illustrated in the video. Use a multimeter to check the switch's functionality; then apply the reverse procedure to reinstall the new component!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Smart (2007-2015 / 451) Replacing damaged brake pads on a Smart Fortwo? Here’s how to remove them. Lift the car on a column lift to the desired height, then remove the wheel…
Smart (2007-2015 / 451) Worn brake pads? Here’s how to remove them on a Smart Fortwo. Lift the car on a column jack to the desired height: remove the wheel with the respecti…
Smart (2014-2022 / 453) If the automatic gearbox of the Smart Fortwo series 453 is stuck, for example due to a completely discharged battery, and you need to put the gearbox…

How to Open the Fuel Filler Flap on a Hyundai i20?

In this tutorial, you will see how to open the fuel filler flap on a Hyundai i20, a very simple operation similar to that of many vehicles. First, go inside the cabin; it is not necessary to insert the key or unlock all the locks, then locate and operate the lever situated in the lower left area of the cabin, right next to the driver's seat. Once done, exit the vehicle, fully open the flap, and unscrew the fuel cap. To close the flap, simply press it gently until you hear a click.

Watch the video!


by ScegliAuto

More videos