Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wiper motor of the Smart?

Model: Smart Smart 453 - Years 2014-2022
Part: Windshield wipers

In order to replace the wiper motor of the Smart, the service hatch must be opened and the supports that secure it to the bodywork must be removed in order to remove it completely. Using an object that acts as a lever, you need to unhook the wiper rods and move the rods to the side. Next, it will be necessary to remove the screws located on the motor, as shown in the video, and disconnect the electrical connector. At this point it will be possible to loosen the central nut and remove the motor completely. Once extracted, it can be replaced with a new moped.

Posted on 25 August 2021 by ScegliAuto

Video tutorial

Related tutorials

Removing the starter motor of a Smart Fortwo
Removing the starter motor of a Smart Fortwo
Smart (2007-2015 / 451) Does the starter motor not work? Let's see how to remove the Smart Fortwo starter motor. We disconnect the battery terminals for safety. We lift the …
How to replace the windshield wipers on a Smart 451.
How to replace the windshield wipers on a Smart 451.
Smart (2007-2015 / 451) Let's see, thanks to this very short video tutorial, the necessary steps to replace the front wiper blades on a Smart 451. To remove the old wiper bl…
Instructions for removing the starter motor on the Smart Fortwo 450
Smart (1998-2007 / 450) Let's find out the procedure needed to disassemble and replace the starter motor on the Smart Fortwo 450, first series, by following the instructions…

How to Remove the Driver's Side Airbag (Steering Wheel) on a BMW 3 Series

How to remove the driver's side airbag (steering wheel) on a BMW 3 Series? This operation is very simple if you follow the steps. Let's see in this guide how to proceed: insert a medium-length screwdriver into the rear slots on the steering wheel and turn until you release the clips that hold the airbag. Once the airbag is disconnected, disconnect the power connectors and remove it from the steering wheel. For reinstalling the airbag: connect the power connector, then press it onto the steering wheel until the locking clips snap into place inside the steering wheel.

Watch the video!


by ScegliAuto

More videos