Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diagram of the fuse box on the Smart Fortwo 450 - 451

Model: Smart Smart 450 - Years 1998-2007
Part: Fuse box

Let's see in this short and simple guide the positioning of the fuse boxes, together with their diagram, on the Smart Fortwo 450 and 451. First of all we go to identify the internal fuse box, which we find at the bottom on the passenger side; on the box we see the numbers that identify each single fuse: the complete diagram is shown in the use and maintenance booklet. The external fuse box is instead found on the back, right on the tailgate; remember to replace any broken fuses only with those of the same amperage!

Posted on 22 September 2021 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the Smart Fortwo 450?
What is the fuse diagram for the Smart Fortwo 450?
Smart (1998-2007 / 450) In the above video, we can see the fuse box of the Smart Fortwo 450 and also how to open it for repair. Most cars have these located under the steeri…
Where are the fuse boxes located on the Smart Fortwo 450?
Where are the fuse boxes located on the Smart Fortwo 450?
Smart (1998-2007 / 450) In this guide we will see the placement of fuse boxes on a Smart Fortwo 450, first series, along with the fuse diagram. First of all, let's identify …
Diagram and location of the fuse boxes of the Smart Fortwo
Diagram and location of the fuse boxes of the Smart Fortwo
Smart (2007-2015 / 451) In this short and simple guide we will see where to find the fuse boxes, as well as where to find the diagram, of the Smart Fortwo. First of all, we …

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos