Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse diagram for the Smart Fortwo 450?

Model: Smart Smart 450 - Years 1998-2007
Part: Fuse box

In the above video, we can see the fuse box of the Smart Fortwo 450 and also how to open it for repair. Most cars have these located under the steering wheel, on the left side, while in this case we find it under the passenger seat, recessed in the car floor, identifiable by lifting the carpet first and then opening its protective panel. Inside we also find the diagram mentioned above, essential in case of a fault search as it helps us to find the connection position of each of the aforementioned fuses.

Posted on 28 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Fuse Box Diagram for the Smart Fortwo 450 - 451
Fuse Box Diagram for the Smart Fortwo 450 - 451
Smart (1998-2007 / 450) This short and simple guide shows the positioning of the fuse boxes along with their diagram for the Smart Fortwo 450 and 451. First, locate the inte…
Fuse Diagram for the Smart ForTwo 450
Fuse Diagram for the Smart ForTwo 450
Smart (1998-2007 / 450) This video provides a detailed overview of the fuse and relay diagram for the Smart ForTwo. From the initial overview, you can see how all the relays…
Location and Diagram of Fuses for the Smart Fortwo
Location and Diagram of Fuses for the Smart Fortwo
Smart (1998-2007 / 450) Briefly review the main steps to locate the fuse box of the Smart Fortwo; also see how to obtain the fuse diagram. First, open the passenger side doo…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos