Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the headlights in the Smart ForTwo?

Model: Smart Smart 450 - Years 1998-2007
Part: Headlight

Adjusting the headlight in the Smart ForTwo is very simple, to do this we need a 4mm Allen key or, alternatively, a flat-tip screwdriver. As indicated in the attached video, the adjustment of the headlight consists in unscrewing and screwing the white plastic nut placed in the upper part of each bulb unit. In this way we can adjust the vertical inclination of the light beam. Remember to carry out the adjustment tests by pointing the headlights towards a white wall, in order to correctly view the illuminated area and carry out a correct calibration.

Posted on 2 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the soft top in the Smart Fortwo Cabrio
How to adjust the soft top in the Smart Fortwo Cabrio
Smart (2014-2021 / ) In this video we will show you how to adjust the soft top of the Smart Fortwo Cabrio. You can adjust the soft top of your Smart 453 both via the remo…
Replace low beam lights on Smart Fortwo
Replace low beam lights on Smart Fortwo
Smart (2007-2015 / 451) Do we want to remove the damaged bulbs of the Smart Fortwo? To begin we remove the front hood of the Smart and find the rear cover of the headlights.…
How to replace the front headlight bulbs in the Smart ForTwo?
How to replace the front headlight bulbs in the Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial, we can see how to replace the front headlight bulbs in the Smart ForTwo, an extremely simple and quick operation. First of all, mak…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos