Reset Service Light on Ligier X TOO

Model: (Various brands) Ligier X Too
Part: Service warning light

This video is currently unavailable

This brief video covers the resetting of the service/maintenance light. Open the driver's door fully.

Position the ignition key to the second stage (this does not mean starting the engine, just turning on the dashboard). At this point, simply press the button (see video) and hold it down.

The dashboard will turn off, and the button should be pressed until the speedometer lights up again. When the dashboard is back on, the service light will be off. Of course, turning off the service light does not mean you are exempt from performing maintenance on the vehicle.

Updated on 22 March 2026 by ScegliAuto

Other guides you may be interested in

Key - Maintenance and repair on other vehicles

Dashboard - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

Reset Service Light on Ligier X TOO

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos