Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Ligier
    4. : Ligier JS50 light reset

(Various brands) Ligier - Video tutorial

Model: (Various brands) Ligier - Years 2013-2020
Part: Checks and maintenance
Operation: Ligier JS50 light reset

What to do when the maintenance indicator appears? Let's see how to reset maintenance on a Ligier S50 mini car. We enter the Ligier vehicle and check the warning light on the instrument panel display. We turn off the instrument panel and press the button next to the display firmly. We turn on the instrument panel with the key while keeping the button pressed. Once the instrument panel is turned on, the maintenance warning light will go out. Switch the instrument panel on and off again with the key to check that the maintenance warning light has actually gone out.


Posted on 3 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Ligier - What are the warning lights on the dashboard of the Ligier Js50? Read Answer
    • Ligier 2013-2020 - What warning lights are present in the dashboard of the Ligier JS 50? Read Answer
    • Ligier 2013-2020 - How do you reset the service indicator on a Ligier? Read Answer
    • Ligier 2013-2020 - What does the wrench light mean on Ligier? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos