Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Battery of the Ligier JS50 Located?

Model: (Various brands) Ligier - Years 2013-2020
Part: Battery

This guide shows how to access the battery location of the Ligier JS50 microcar. The electric accumulator is located under the passenger seat. Remove the seat by turning the two knobs on the front side of the seat to the left; after moving the seat forward, you will uncover a compartment where the battery is housed, protected by a plastic plate held by snap clips. The battery specifications are 12 Volts, with an amperage of 340 Amperes and 40 Ampere-hours. The cost is approximately £60 online.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Ligier Js50
How to Replace the Battery in a Ligier Js50
(Various brands) Ligier (2013-2020 / ) In this video, you will see the procedure to replace the battery in a Ligier Js50 microcar. The battery in this microcar is located under the passeng…
How to Reset the "Service" Light on a Ligier JS50
How to Reset the "Service" Light on a Ligier JS50
(Various brands) Ligier (2013-2020 / ) Before you can start, sit in the driver's seat of your Ligier JS50. First, turn the ignition on and off. Next, open the door of your microcar while r…
How do you set the clock on the Ligier Js50?
How do you set the clock on the Ligier Js50?
(Various brands) Ligier The microcar we are talking about is the Ligier Js50, and we can see one in the attached video, focusing mainly on how to set the analog clock on the…

Other guides you may be interested in

    Frequently Asked Questions

    • Ligier 2013-2020 - Where is the battery of your Ligier microcar located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos