Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Ligier
    4. : How to replace the battery in a Ligier Js50

(Various brands) Ligier - Video tutorial

Model: (Various brands) Ligier - Years 2013-2020
Part: Battery
Operation: How to replace the battery in a Ligier Js50

In this video we will see the procedure for replacing the battery in a Microcar Ligier js50. The battery in this microcar is located under the passenger seat. As a first step, it will be necessary to unscrew the plastic bolts present at the base, in this way it will be easy to extract the seat from its housing. Remove the black plastic cover at the base, so you will have a full view of the battery. First remove the negative terminal (black) with a wrench and then the positive pole (red). Insert the new battery, connecting the red terminal first and then the black pole.


Posted on 9 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Ligier - Where is the battery located on Ligier JS50? Read Answer
    • Ligier 2013-2020 - Where is the battery of your Ligier microcar located? Read Answer
    • Ligier - Where is the battery of the Ligier IXO located? Read Answer
    • Ligier 2013-2020 - Where is the battery housing of the ligier 50js? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos