Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ligier JS50

Model: (Various brands) Various
Part: Service warning light

Resetting the service light on a Ligier JS50 is a very simple and quick operation. First, turn on the vehicle's instrument panel. Press and hold the buttons on the instrument panel until the light goes out completely. When the light has gone out, release the buttons and turn off the vehicle, then restart it. This operation must only be performed after having the service carried out at a garage. If you perform the reset procedure without having the service done, you may create problems for the control unit once the service is completed and the new parameters are set.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Gear Oil of the Ligier JS50?
How to Change the Gear Oil of the Ligier JS50?
(Various brands) Various To change the gear oil of the Ligier JS50, lift the car to access the components underneath. Locate the gearbox and unscrew the drain plug bolt to co…
How to Replace the Variator Belt on a Ligier JS50
How to Replace the Variator Belt on a Ligier JS50
(Various brands) Various In this video, you will see how to perform a very simple operation like changing the variator belt on a Ligier JS50. The space inside the engine of t…
How to Reset the Service Light on a Ligier
(Various brands) Various To reset the service light for the Ligier service, you need to: - press and hold the reset button on the central dashboard display for a few seconds;…

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos