Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Variator Belt on a Ligier JS50

Model: (Various brands) Various
Part: Checks and maintenance

In this video, you will see how to perform a very simple operation like changing the variator belt on a Ligier JS50. The space inside the engine of this vehicle is ample, so there is no issue working in a cramped environment. First, locate the variator, where you will undo the bolts, which are M6 with a 10 mm head. Loosen them, and then you can remove the belt to be replaced. You can find it on Amazon with the code B07Q1W8WPB for £14.40 with free delivery for Prime customers. Place the new belt in position and tighten the bolts; the operation is complete.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Gear Oil of the Ligier JS50?
How to Change the Gear Oil of the Ligier JS50?
(Various brands) Various To change the gear oil of the Ligier JS50, lift the car to access the components underneath. Locate the gearbox and unscrew the drain plug bolt to co…
How to Reset the Service Light on a Ligier JS50
How to Reset the Service Light on a Ligier JS50
(Various brands) Various Resetting the service light on a Ligier JS50 is a very simple and quick operation. First, turn on the vehicle's instrument panel. Press and hold the …
How to Replace the Belt of the T Max 500?
How to Replace the Belt of the T Max 500?
(Various brands) Various When you start to hear a squeaking noise from the belt during deceleration, it is probably time to replace it. To proceed with the replacement, follo…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos