Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Belt of the T Max 500?

Model: (Various brands) Various

When you start to hear a squeaking noise from the belt during deceleration, it is probably time to replace it. To proceed with the replacement, follow these steps: remove the screws securing the plastic cover on the right side and the side skirt. You will then have access to the area where the variator is located; completely remove the variator cover. Next, use a variator locking tool to extract the inner variator cover. Then, remove the pulley plate, and you will have access to the belt, making it possible to replace it.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Windscreen from a T-Max 500 Scooter
How to Remove the Windscreen from a T-Max 500 Scooter
(Various brands) Various Removing the windscreen from the T-Max 500 scooter has never been so simple thanks to our video tutorial that will show you how to perform this strai…
How to Replace the Drive Belt
How to Replace the Drive Belt
(Various brands) Various Disconnect and lift the bonnet, then disconnect the battery cables. The drive belt will likely be located on one of the two shorter sides of the engi…
How to set the time on a T Max 500 scooter
How to set the time on a T Max 500 scooter
(Various brands) Various In this video tutorial, you can see how to set the time on a T Max scooter. Follow this simple procedure to work independently. The first thing to do…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos