Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Poly V Belt on a Vehicle

Model: (Various brands) Various
Part: V-belt

Video tutorial

If you notice unusual noises when starting the engine or during operation, it is necessary to replace the Poly V belt. To perform this operation, remove the front right wheel, as this type of belt on cars with a trapezoidal engine is located at the bottom.

Next, loosen the tensioner pulley and slide off the belt. Install the new belt and tighten the pulley.

To replace the Poly belt, loosen the tensioner and move the pulley to one side; with everything securely fixed, remove the belt from the components. Install the new belt on the pulley grooves and tighten the tensioner, removing the locking pin.


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How to replace the pulley of the tensioner roller of the Poly-V belt
How to replace the pulley of the tensioner roller of the Poly-V belt
(Various brands) Various In this video tutorial, we can see how to replace the pulley of the tensioner roller of the Poly-V belt, following some fundamental steps: the reason…
How to Replace the Timing Belt on the Eurocomah
How to Replace the Timing Belt on the Eurocomah
(Various brands) Various The timing belt on a Eurocomah 16q work vehicle is located inside the engine compartment, near the fuel pump and the engine. To replace the timing be…
How the Car Auxiliary Belt Works.
How the Car Auxiliary Belt Works.
(Various brands) Various In this video tutorial, you can see how the auxiliary belt is made, what it does, and when it needs to be replaced. The auxiliary belt is responsible…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos