Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the air vents on the Smart Forfour

Model: Smart Smart 454, Fourfour1 - Years 2004-2006
Part: Air vents

In this short video we will see how to remove and replace the air vents of the Smart Forfour, but also of the Fortwo. First of all, let's get on board the car and equip ourselves with a small pointed lever; then we rotate the air vent and insert our tool to pry the vent and pull it, until it is removed from its seat, as shown in the video. At this point we are going to install, if necessary, the new air diffuser; we carry out the same operation to replace all the other air vents on the dashboard of the car!

Posted on 22 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air vents on the Smart Roadster
How to replace the air vents on the Smart Roadster
Smart (2003-2005 / Roadster, 452) Let's see in this short and simple guide how to remove and replace the dashboard air vents on the Smart Roadster, following the instructions below. F…
Replacement of the front headlight bulbs of the Smart Fortwo - Forfour
Replacement of the front headlight bulbs of the Smart Fortwo - Forfour
Smart (2014-2022 / 453) Today we will discover the instructions that will allow us to disassemble and replace the bulbs of the front headlight of the Smart Fortwo and Forfou…
Where is the fuse box located in the 2015 Smart Forfour?
Where is the fuse box located in the 2015 Smart Forfour?
Smart (2014-2022 / 453) To locate the fuse box of your 2015 Smart Forfour independently, you just need to follow these simple steps. First of all, you need to reach the driv…

Other guides you may be interested in

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos