Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Smart ForTwo fuse scheme?

Model: Smart Smart 450 - Years 1998-2007
Part: Fuse box

In this video we can see the diagram of the Smart ForTwo fuse box, as well as its position, to be consulted in the event that one or more devices show signs of malfunction, and therefore we need to check the relative fuses. As we can see, the box of this model is positioned inside the passenger compartment, in the lower left area of the dashboard, accessible from the base of the pedals. In the event that a fuse is broken, remember to replace it with a spare of the same amperage, so as not to damage the device that uses it.

Posted on 22 February 2022 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse layout of the Smart ForTwo?
What is the fuse layout of the Smart ForTwo?
Smart (2014-2022 / 453) In this video we can see where the fuse box is located in the Smart ForTwo and what is the corresponding diagram, useful in case we need to check the…
Fuse box diagram and location for the Smart Fortwo.
Fuse box diagram and location for the Smart Fortwo.
Smart (2007-2015 / 451) In this short guide, we will see the information related to the fuse scheme and positioning of the Smart Fortwo. First, let's get on board the passen…
Fuse box layout and positioning of the Smart Fortwo
Fuse box layout and positioning of the Smart Fortwo
Smart (2007-2015 / 451) Today we will see the diagram and positioning of the fuse compartments of the Smart Fortwo, in simple and quick steps. First, we open the front door …

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos