Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Smart

Model: Smart Smart 451 - Years 2007-2015
Part: Air filter

The air filter is one of the most important components of all those inside the engine compartment of your Smart. Its main function, in fact, is to make the engine "breathe" correctly while preserving its performance and reliability. After traveling many kilometers it is necessary to replace the filter and below we will find out how to do it. First, turn off the car and reach for the engine. Locate the small box containing the air filter and unscrew the screws present so that you can remove the protective cover. At this point, replace the old filter with the new one, refit the cover and the protection panel located above the engine.

Posted on 24 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Removing the engine filter on Smart Fortwo
Smart (2007-2015 / 451) Removing the engine air filter? We remove the engine air filter of the Smart Fortwo located in the engine compartment. We open the engine compartment…
Where is the cabin air filter of the Smart Four Four located?
Where is the cabin air filter of the Smart Four Four located?
Smart (2004-2006 / 454, Fourfour1) The cabin air filter on a Smart Four Four model 451 vehicle is located inside the cabin. Specifically, the filter is located under the passenger side…
How to replace the air filter of the Smart 451
How to replace the air filter of the Smart 451
Smart (2007-2015 / 451) .. Today we will explain how to replace the air filter of the Smart 451 on your own. Open the front hood and, using a flat-head.. …

Other guides you may be interested in

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos