Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box in the Smart 450

Model: Smart Smart 450 - Years 1998-2007
Part: Fuse box

In this video tutorial you can see where the fuse box is located on the Smart 450, following a few simple steps that will guide you step by step towards the correct management of your car, in total autonomy, without resorting to the assistance of a specialized mechanic. In your Smart 450 there are two fuse boxes: It is not difficult to identify them because one is positioned on the driver's side and to see it you just need to open the driver's side door, then you have to get down and look up as shown in the video ; instead the other fuse box can be found in the tailgate; Just open the tailgate and pull the handle to lift the inner lid. All fuses are numbered to obtain a correct identification of the same.

Posted on 23 September 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the Smart 450 fuse box located
Where is the Smart 450 fuse box located
Smart (1998-2007 / 450) In this video we can see where the fuse box of the Smart 450 is located. In the Smart 450 we can find two fuse boxes: one positioned on the driver's …
Where is the fuse box located in the Smart 450?
Where is the fuse box located in the Smart 450?
Smart (1998-2007 / 450) In this video we will see where the fuse box is located in the first series of the Smart Fortwo, code 450. Conventionally in cars, the fuse box is lo…
Diagram of the fuse box on the Smart Fortwo 450 - 451
Diagram of the fuse box on the Smart Fortwo 450 - 451
Smart (1998-2007 / 450) Let's see in this short and simple guide the positioning of the fuse boxes, together with their diagram, on the Smart Fortwo 450 and 451. First of al…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos