Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2006 Smart Roadster

Model: Smart Smart Roadster, 452 - Years 2003-2005
Part: Service warning light

In the following guide we will find out what are the various steps you need to perform if you want to manually reset the service light on your 2006 Smart Roadster. First insert the key, turn it to position two and start the instrument panel. Immediately after, locate the central button located above the speedometer and press it several times until the vehicle maintenance item appears on the display. Then turn off the ignition and hold down the same button you used previously for about 10 seconds. At the same time restart the picture and you are done.

Posted on 18 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Smart Roadster?
How do you reset the Service light on the Smart Roadster?
Smart (2003-2005 / Roadster, 452) The operation of resetting the Service light on the Smart Roadster is done by turning on the instrument panel and then navigating to its menu, by rep…
How do you reset the Service light on the Smart Roadster?
How do you reset the Service light on the Smart Roadster?
Smart (2003-2005 / Roadster, 452) To reset the Service light on the Smart, you need to turn on the dashboard and then navigate to its menu by repeatedly pressing the button on the top…
How do you reset the Service light on the Smart Roadster?
How do you reset the Service light on the Smart Roadster?
Smart (2003-2005 / Roadster, 452) It will be possible to completely reset the Service light displayed on the instrument panel of the Smart Roadster by holding down the button located …

How to Remove the Centre Console on a Renault Kangoo

To remove the centre console on a Renault Kangoo, use a plastic lever to pry off the trim located at the bottom of the centre console. Remove the leather gaiter from the gear lever. After removing the gaiter, unscrew the securing screw located at the rear of the centre console (if present). Once this is done, pull the console away and disconnect any power cables. Finally, insert the new part into the centre console space and reassemble all components as they were removed.

Watch the video!


by ScegliAuto

More videos