Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Shoes on a Smart ForTwo?

Model: Smart Smart 451 - Years 2007-2015
Part: Brake system

In this tutorial, you will learn how to replace the rear brake shoes on a Smart ForTwo, a task that requires a good level of manual skill. First, lift the rear of the car and remove the wheel, then unscrew the fixing bolts of the brake cover and remove it. Next, disconnect the two brake shoes, remove the two side pins, and detach both the lower and upper springs. At this point, transfer all the control elements to the replacement shoes, if they are in good condition, position them inside the drum, and follow the reverse procedure to reassemble everything.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Shoe Cylinder of the Smart Fortwo
Replacing the Rear Brake Shoe Cylinder of the Smart Fortwo
Smart (2014-2022 / 453) In this video tutorial, you will learn how to remove and replace the rear brake shoe cylinder of the Smart Fortwo. First, lift the vehicle and start …
How to Replace the Rear Brake Pump or Cylinder on the Smart Fortwo 450
How to Replace the Rear Brake Pump or Cylinder on the Smart Fortwo 450
Smart (1998-2007 / 450) This guide outlines the main steps to remove and replace the rear brake pump or master cylinder on the Smart Fortwo 450, first series. First, lift th…
How to Replace the Rear Brake Shoes on the Smart
How to Replace the Rear Brake Shoes on the Smart
Smart (2007-2015 / 451) To replace the rear brake shoes on the Smart, lift the car with a jack so that the corresponding wheel is off the ground. This will allow you to unsc…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos