Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the interior bulbs of the Smart 453?

Model: Smart Smart 453 - Years 2014-2022
Part: Interior dome light bulb

Replacing the bulb in the interior ceiling light of the Smart 453 is easier said than done. All we need is a flat plastic object (we avoid metal because it could cause scratches to the interior) such as a ruler or a spatula. With this tool we are going to lever between the ceiling of the car and the ceiling light of the passenger compartment lights in order to release the latter. The bulbs are now accessible and we can unscrew them and replace them with halogen ones, like the standard ones, or with more performing LED ones. When we have finished, we put the ceiling light back in its place.

Posted on 31 October 2022 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Smart 453?
Where are the fuses located in the Smart 453?
Smart (2014-2022 / 453) If you own a Smart 453 and want to discover where all the various fuses of the car are located, all you have to do is follow the steps described belo…
How to replace the control unit of the Smart 453?
How to replace the control unit of the Smart 453?
Smart (2014-2022 / 453) To be able to replace the Smart 453 engine management unit, you must open the boot lid and remove the cover on the right side, in correspondence with…
Where is the OBD port located on the Smart 453 2015?
Where is the OBD port located on the Smart 453 2015?
Smart (2014-2022 / 453) In this new mini guide aimed at all of you who own a Smart 453 (year 2015), we will guide you step by step in locating the OBD port inside the cabin.…

How to Remove the Front Brake Rotor on a BMW X3

Let's see how to remove the front brake rotor on a BMW X3. Position your car on a column lift and raise it to a comfortable height for working. Loosen the bolts with a socket wrench or air drill and remove the wheel, then start loosening the bolts of the brake caliper to detach it from the bracket, using a screwdriver to remove the brake pads. Now remove the caliper bracket and loosen the bolts on the brake rotor (using a Torx screwdriver), pull the rotor towards you to slide it off the wheel hub. Install the new brake rotor with all the associated bolts, tighten the caliper bracket to the rotor and the brake pads, then install the brake caliper, making sure to tighten all the bolts securely. Before mounting the wheel, bleed the brake caliper and then tighten the bolt. Finally, install the wheel with the bolts.

Watch the video!


by ScegliAuto

More videos