Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Smart Fortwo service light

Model: Smart Smart 451 - Years 2007-2015
Part: Service warning light

Below we will see instructions on how to reset the service light of the routine maintenance of the engine oil change of the Smart Fortwo. First of all, let's get on board the car and make sure that all the doors are closed; then we turn on the instrument panel and go to press and hold down the button that we find on the left of the instrument panel, turning the instrument panel off and on, as shown in the video. We will then see the warning light flash on the instrument panel, until it goes completely to zero; now it is possible to carry out the new kilometers before the next coupon!

Posted on 10 January 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Smart ForTwo?
How to reset the "Service" light on a Smart ForTwo?
Smart (2014-2022 / 453) Good morning, today I will guide you through the process of resetting the partial trip on your Smart ForTwo. To begin, let's carefully enter the car.…
How to reset the service in the Smart ForTwo?
How to reset the service in the Smart ForTwo?
Smart (2014-2022 / 453) After carrying out the scheduled maintenance operations provided for the Smart ForTwo 453, the relative signal on the display must be reset by follow…
How to reset the service light on the Smart Fortwo 453
How to reset the service light on the Smart Fortwo 453
Smart (2014-2022 / 453) Let's find out in this video tutorial how to reset the oil change routine maintenance service light on a Smart Fortwo 453, third series. First of all…

Other guides you may be interested in

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos