Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the dashboard and replace the bulbs of the Smart Fortwo.

Model: Smart Smart 450 - Years 1998-2007
Part: Instrument cluster

Today's guide will show us the main steps to disassemble and replace the instrument panel and its bulbs of the Smart Fortwo. First, we get into the car and start by releasing and removing the plastic cover above the instrument panel; we then unscrew the side screws to detach the instrument panel from the dashboard, disconnecting the electrical wiring found on the back, as shown in the video. At this point, we proceed to replace the bulbs of the instrument panel, which are located at the back; we then reassemble and finally connect the instrument panel!

Posted on 7 April 2023 by ScegliAuto

Video tutorial

Related tutorials

Smart Fortwo instrument cluster bulb replacement guide
Smart Fortwo instrument cluster bulb replacement guide
Smart (2007-2015 / 451) Today's video tutorial will show us the steps that will allow us to disassemble and replace the bulbs of the Smart Fortwo instrument panel. First we …
How to replace the instrument cluster bulbs on the Smart Fortwo 450
How to replace the instrument cluster bulbs on the Smart Fortwo 450
Smart (1998-2007 / 450) Let's find out in this video how to remove and replace, in simple and quick steps, the bulbs of the dashboard instrument panel on the Smart Fortwo 45…
Replace low beam lights on Smart Fortwo
Replace low beam lights on Smart Fortwo
Smart (2007-2015 / 451) Do we want to remove the damaged bulbs of the Smart Fortwo? To begin we remove the front hood of the Smart and find the rear cover of the headlights.…

How to Change the Glow Plugs on a Hyundai Santa Fe

In this video, see how to remove and replace the glow plugs on your Hyundai Santa Fe. Pull the lever to open the engine compartment located at the bottom left of the dashboard, lift the bonnet, and secure it. Follow the video for the tools to use for disassembly. Remove the plastic engine cover and the air filter kit; you will see the engine head bare without plastics. Unscrew the coils using a socket wrench and disconnect the power cables. Once all the coils are removed, unscrew the glow plugs from the head and take them out. To remove the other coils and glow plugs, you need to uncover the metal protection from the head; unscrew these as well and prepare to install the new glow plugs. Be careful not to let any debris fall into the engine head while unscrewing the glow plugs. It is advisable to vacuum the glow plug wells before disassembly.

Watch the video!


by ScegliAuto

More videos