Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to replace the instrument cluster bulbs on the Smart Fortwo 450

Smart - Video tutorial

Model: Smart Smart 450 - Years 1998-2007
Part: Dashboard light
Operation: How to replace the instrument cluster bulbs on the Smart Fortwo 450

Let's find out in this video how to remove and replace, in simple and quick steps, the bulbs of the dashboard instrument panel on the Smart Fortwo 450 first series. First of all, let's get on board the car and start by removing our instrument panel; to do this we use a torx screwdriver and unscrew the screws that we find under the plastic cap of the steering wheel, disconnecting the electrical connector that we find behind the panel. At this point we can remove and replace any faulty bulbs; pulling them out together with the lamp holders. So let's reassemble the instrument panel!


Posted on 13 March 2024 by ScegliAuto



How to replace the bulbs of the central instrumentation of the Smart Fortwo
Smart (1998-2007 / 450) Let's go and see in this short and simple guide how to remove and replace the bulbs of the Smart Fortwo central instrument cluster controls. First we
How to remove the dashboard and replace the bulbs of the Smart Fortwo.
Smart (1998-2007 / 450) Today's guide will show us the main steps to disassemble and replace the instrument panel and its bulbs of the Smart Fortwo. First, we get into the c
Smart Fortwo 450 headlight bulb replacement
Smart (1998-2007 / 450) In this short video we will see the instructions necessary for the disassembly and replacement of the headlight bulb on the Smart Fortwo 450, first g

Other guides that may interest you

    Frequently Asked Questions

    • Smart 2004-2006 - How to turn on the interior light on a Smart Fortwo? Read Answer

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos