Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the radio from a Smart 450?

Model: Smart Smart 451 - Years 2007-2015
Part: Car stereo

To remove the radio from the Smart car, you need to remove the control panel for the air conditioning by disconnecting the connector at the back in order to access the screws that hold the trims around the radio. These trims can now be removed, allowing access to the underlying screws that secure the radio. The device can then be extracted from its housing and the connectors at the back can be disconnected. At this point, it is possible to connect the new replacement piece, securing it with screws.

Posted on 9 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the car stereo on Smart Fortwo 450-451
How to disassemble the car stereo on Smart Fortwo 450-451
Smart (1998-2007 / 450) Let's see in this video how to disassemble the original car radio on a Smart Fortwo 450 and 451, first and second series respectively. First of all w…
Remove the car stereo of a Smart fortwo
Remove the car stereo of a Smart fortwo
Smart (1998-2007 / 450) Remove the car stereo from the Smart Fortwo? We disassemble the car radio and assemble a new one. We use the original or aftermarket metal keys to di…
How to replace the Smart 450 car radio
How to replace the Smart 450 car radio
Smart (1998-2007 / 450) In today's video we see how to install a two din car radio in the first series of Smarts, or the 450. This operation will allow you to modernize your…

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos