Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
451
- Years 2007-2015 In this tutorial, we can see how to restore the clutch actuator of the Smart ForTwo, a very simple and quick operation, which must be done after disassembling it and before repositioning it. To do this, we will need two power cables of similar thickness to those used for emergency starting. First of all, we connect the two cables to the car battery terminals, then we connect the positive cable to pin number 6 of the connector and the negative cable to pin number 3. In case we need to extend the actuator, we just need to reverse the two polarities.
Posted on 26 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.040
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |