Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Battery on a Smart Fortwo

Model: Smart Smart - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

See other generations:
Video tutorial

Let’s briefly go through the instructions that will allow you to remove and replace the battery on a Smart Fortwo. First, open the front bonnet of the vehicle by releasing it via the levers; inside, you will find the battery, then unscrew the bracket screws and disconnect both terminals (positive and negative) to remove it from its compartment, as shown in the video.

At this point, install the new battery of the correct type and with the same amperage, inserting it in the correct orientation; finally, reattach the front bonnet and check the engine starts!


Posted on 6 November 2026 by ScegliAuto


Related tutorials

How to Change the Battery on a Smart Fortwo
How to Change the Battery on a Smart Fortwo
Smart (1998-2007 / 450) Today's guide will illustrate the steps to remove and replace the battery on a Smart Fortwo. First, open the front passenger door and start removing …
Replacing the Traction Battery of the Smart Fortwo
Replacing the Traction Battery of the Smart Fortwo
Smart (2007-2015 / 451) Follow the main steps to remove and replace the traction battery of the electric Smart Fortwo. First, lift the vehicle and start removing the plastic…
Replacing the Key Battery of the Smart Fortwo
Replacing the Key Battery of the Smart Fortwo
Smart (2007-2015 / 451) Today, in this short and simple guide, see how to disassemble and replace the battery of the remote key for the Smart Fortwo. First, take the remote …

    Frequently Asked Questions

    • Smart 2014-2022 - Where is the battery on the Smart 453? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos