Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the Smart Fortwo?

Model: Smart Smart 453 - Years 2014-2022
Part: Battery

In order to replace the battery of the Smart Fortwo, you need to detach the hooks that secure the hood panel, so that you can access the components in the lower part of the compartment: here you will be able to locate the battery in the top left. You will need to unscrew the screws that secure the device to its housing and disconnect the power cables: at this point, you will be able to insert the new battery into its slot. This must be secured with screws and connected to the respective cables, then covering everything with the hood and verifying that everything works.

Posted on 30 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in the Smart Fortwo
How to Replace the Battery in the Smart Fortwo
Smart (2014-2022 / 453) Below are the step-by-step instructions to remove and replace the battery in the Smart Fortwo. First, open the front bonnet of your car and start by …
How to Replace the Battery in a Smart ForTwo
How to Replace the Battery in a Smart ForTwo
Smart (2014-2022 / 453) Before starting, open the front bonnet of your Smart ForTwo. Begin by loosening the nuts that secure the two terminals to the battery, then disconnec…
How to replace the battery of the Smart Fortwo
How to replace the battery of the Smart Fortwo
Smart (2014-2022 / 453) Below we will see the main steps that will allow us to disassemble and replace the battery of the Smart Fortwo. First, we open the front hood of the …

    Frequently Asked Questions

    • Smart 2014-2022 - Where is the battery on the Smart 453? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos