Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

To reset the service light on the Smart 451.

Model: Smart Smart 451 - Years 2007-2015
Part: Service warning light

In order to successfully complete the manual reset of the service light on the instrument panel of your Smart 451, you must follow all the steps described in the following guide dedicated to you. First of all, you need to enter the car and sit in the driver's seat, then turn on the ignition and press the button located to the left of the instrument panel twice in a row. Then, turn off and turn on the ignition again while simultaneously holding down the same button used earlier. Finally, wait for the completion of the service light reset.

Posted on 1 December 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light of the Smart 451?
How do you reset the Service light of the Smart 451?
Smart (2007-2015 / 451) The Service light of the Smart 451 can be reset by holding down the button located on the left side of the instrument panel. While holding it down, y…
How do you reset the Service light on the Smart 451?
How do you reset the Service light on the Smart 451?
Smart (2007-2015 / 451) The procedure for resetting the Service light on the Smart 451 involves pressing and holding the button located on the left side of the instrument pa…
How do you reset the Service light on the Smart 451?
How do you reset the Service light on the Smart 451?
Smart (2007-2015 / 451) It will be possible to completely delete the Service light from the instrument panel of the Smart 451 by keeping the button on the left side of the i…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos