Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Smart Roadster?

Model: Smart Smart 452, Roadster - Years 2003-2005
Part: Service warning light

The operation of resetting the Service light on the Smart Roadster is done by turning on the instrument panel and then navigating to its menu, by repeatedly pressing the button on the top left of the panel. It must be pressed until the maintenance interval is displayed; now the instrument panel can be turned off and the button should continue to be held down. At this point, while still holding it down, the key can be turned and the instrument panel can be turned on, waiting for the Service light to be reset; after resetting the light, the panel can be turned off again.

Posted on 23 December 2023 by ScegliAuto

Video tutorial

Related tutorials

How to perform the service and reset the service light on the Smart Roadster
How to perform the service and reset the service light on the Smart Roadster
Smart (2003-2005 / 452, Roadster) In this guide we will see the instructions that will allow us to perform the routine maintenance check, and then reset the service light of the Smart…
How to reset the service light on the 2006 Smart Roadster
How to reset the service light on the 2006 Smart Roadster
Smart (2003-2005 / 452, Roadster) In the following guide we will find out what are the various steps you need to perform if you want to manually reset the service light on your 2006 S…
How do you reset the Service light on the Smart Roadster?
How do you reset the Service light on the Smart Roadster?
Smart (2003-2005 / 452, Roadster) It will be possible to completely reset the Service light displayed on the instrument panel of the Smart Roadster by holding down the button located …

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos