Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Smart

Model: Smart Smart 450 - Years 1998-2007
Part: Tail light

First, open the boot lid, both the upper and lower sections, to access the screws securing the light. Disconnect the connector located at the back to fully remove it. Detach the light assembly from the surrounding panel to effectively replace the bulbs. If necessary, repeat the process on the other side. For reassembly, simply retrace the steps in reverse, and you're done!

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light and Bulbs of the Smart Roadster
How to Replace the Rear Light and Bulbs of the Smart Roadster
Smart (2003-2005 / Roadster, 452) Below are the main steps to remove and replace the rear light and its bulbs of the Smart Roadster. First, move to the rear of the vehicle and start o…
Replacing Rear Headlamp Bulbs on Smart Fortwo
Replacing Rear Headlamp Bulbs on Smart Fortwo
Smart (2007-2015 / 451) Today, you will learn how to remove and replace the rear headlamp bulbs on a second-generation Smart Fortwo. First, open the boot and remove the side…
How to Replace the Rear Light Bulb on the Smart Fortwo
How to Replace the Rear Light Bulb on the Smart Fortwo
Smart (2007-2015 / 451) In this short guide, you will learn how to remove and replace the rear light bulbs on the Smart Fortwo, following the instructions below. First, open…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos