Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Headlamp Bulbs on Smart Fortwo

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

See other generations:
Video tutorial

Today, you will learn how to remove and replace the rear headlamp bulbs on a second-generation Smart Fortwo. First, open the boot and remove the side trim.

Disconnect the electrical connector by pressing the tab. Next, release the clips of the rear headlamp by using a flat screwdriver and remove the bulb holder along with all the bulbs. Replace any faulty bulb by rotating it, as shown in the video.

Finally, reassemble everything by reversing the procedure!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Headlamp Bulb of a Smart Fortwo
How to Remove the Rear Headlamp Bulb of a Smart Fortwo
Smart (2014-2022 / 453) How to remove the rear headlamp bulb of a Smart Fortwo? Let's look at replacing the damaged part. Remove the plastic panel covering the rear headlamp…
How to Replace the Rear Light Bulb on the Smart Fortwo
How to Replace the Rear Light Bulb on the Smart Fortwo
Smart (2007-2015 / 451) In this short guide, you will learn how to remove and replace the rear light bulbs on the Smart Fortwo, following the instructions below. First, open…
How to Replace the Rear Headlamp Bulbs on a Smart Fortwo
How to Replace the Rear Headlamp Bulbs on a Smart Fortwo
Smart (2014-2022 / 453) How to remove the rear headlamp of a Smart Fortwo to replace the bulbs? Follow these steps: open the boot lid, use a screwdriver to unscrew the secur…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos