Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs in a Smart

Model: Smart Smart 451 - Years 2007-2015
Part: Spark plugs

Release and lift the bonnet using the designated lever and secure it with the prop rod. Start by unscrewing the bolts that secure the connectors to each injector. After unscrewing the four bolts, disconnect the connectors to extract the injectors. Now, using a socket wrench, reach the bottom of the cylinder where the injector was housed and unscrew each individual spark plug located at the bottom. Remove them and carry out the necessary work. Retrace the steps described for reassembling the various components.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Spark Plugs on the Smart Roadster
Replacing the Spark Plugs on the Smart Roadster
Smart (2003-2005 / Roadster, 452) Today, we will see in this video tutorial how to remove and replace the engine spark plugs of the Smart Roadster, following the instructions below. F…
How to Remove the Spark Plugs from the Smart Fortwo?
How to Remove the Spark Plugs from the Smart Fortwo?
Smart (1998-2007 / 450) This guide outlines the main steps to remove and replace the spark plugs on the Smart Fortwo. First, access the rear of your car to detach and remove…
Remove the Spark Plugs on a Smart Roadster
Remove the Spark Plugs on a Smart Roadster
Smart (1998-2007 / 450) Want to replace the spark plugs on your Smart Roadster? Here’s how to remove the spark plugs located in the engine compartment. Lift the rear bonnet …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos