Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Ssangyong Korando?

Model: SsangYong Korando MK 3 - Years 2010-2019
Part: Headlight bulb

To replace the front headlamp bulb on a Ssangyong Korando, open the bonnet to access the screws securing the headlamp from the top. Once these screws are loosened, you can pull the headlamp unit out from its housing by disconnecting the connector inside. At this point, open the headlamp and remove the bulb located inside, replacing it with a new one. After the replacement, reconnect the headlamp and secure it properly with the screws.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio in a Ssangyong Korando?
How to Replace the Radio in a Ssangyong Korando?
SsangYong Korando (2010-2019 / MK 3) To replace the radio in a Ssangyong Korando, use a tool like a screwdriver to pry off the trim around the dashboard that surrounds the radio. Once th…
How do you reset the tire pressure light on the Ssangyong Korando?
How do you reset the tire pressure light on the Ssangyong Korando?
SsangYong Korando (2010-2019 / MK 3) In order to reset the tire pressure warning light on the Ssangyong Korando, you need to check which tires are not at the correct pressure level: you …
How to Remove the Door Panel of a Ssangyong Korando?
How to Remove the Door Panel of a Ssangyong Korando?
SsangYong Korando (2010-2019 / MK 3) To replace the door panel of a Ssangyong Korando, you need to loosen the screws that secure the panel to its housing. The fastening screws are locate…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos